Objetivos de aprendizaje:
• Examinar la red con las rutas estáticas del siguiente salto.
•Visualizar la configuración.
•Verificar la conectividad.
•Actualizar la red con rutas estáticas de interfaz de salida.
•Eliminar las rutas estáticas del siguiente salto.
•Configurar las rutas estáticas de la interfaz de salida.
•Examinar la red con rutas estáticas de interfaz de salida.
•Examinar la configuración.
•Verificar la conectividad.
PUERTOS DISPONIBLES
SERIAL 0/0/0 10.0.1.1 255.255.255.0
0/0/1 10.0.2.1 255.255.255.0
VTY 0 4 pass:cisco
cdp
Device ID: RandD
Entry address(es):
IP address : 10.0.2.2
Platform: cisco C2800, Capabilities: Router
Interface: Serial0/0/1, Port ID (outgoing port): Serial0/2/1
Holdtime: 122
Version :
Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 3-Nov-06 06:50 by miwang
advertisement version: 2
Duplex: full
router= randD
fast ethernet 0/0 esta up
ip 10.0.5.1 255.255.255.0
fast ethernet 0/1 esta down
Serial0/2/0 is administratively down
Serial0/2/1 is up
ip 10.0.2.2 255.255.255.0
vlan no
cdp
Device ID: HQ
Entry address(es):
IP address : 10.0.2.1
Platform: cisco C1841, Capabilities: Router
Interface: Serial0/2/1, Port ID (outgoing port): Serial0/0/1
Holdtime: 176
Version :
Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 14:54 by pt_team
advertisement version: 2
Duplex: full
show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID Local Intrfce Holdtme Capability Platform Port ID
NewProducts Fas 0/0 151 S 2950 Fas 0/24
HQ Ser 0/2/1 151 R C1841 Ser 0/0/1
