2.3.4 asignacion de una red con cdp y telnet

|

PUERTOS DISPONIBLES

SERIAL 0/0/0 10.0.1.1  255.255.255.0
       0/0/1 10.0.2.1  255.255.255.0


VTY 0 4  pass:cisco

cdp

Device ID: RandD
Entry address(es):
  IP address : 10.0.2.2
Platform: cisco C2800, Capabilities: Router
Interface: Serial0/0/1, Port ID (outgoing port): Serial0/2/1
Holdtime: 122

Version :
Cisco IOS Software, 2800 Software (C2800NM-IPBASE-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by cisco Systems, Inc.
Compiled Wed 3-Nov-06 06:50 by miwang

advertisement version: 2
Duplex: full


router= randD

fast ethernet 0/0 esta  up
ip 10.0.5.1   255.255.255.0

fast ethernet 0/1 esta down


Serial0/2/0 is administratively down

Serial0/2/1 is up
ip 10.0.2.2 255.255.255.0

vlan no

cdp

Device ID: HQ
Entry address(es):
  IP address : 10.0.2.1
Platform: cisco C1841, Capabilities: Router
Interface: Serial0/2/1, Port ID (outgoing port): Serial0/0/1
Holdtime: 176

Version :
Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.3(14)T7, RELEASE SOFTWARE (fc2)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2006 by Cisco Systems, Inc.
Compiled Mon 15-May-06 14:54 by pt_team

advertisement version: 2
Duplex: full

show cdp neighbors
Capability Codes: R - Router, T - Trans Bridge, B - Source Route Bridge
                  S - Switch, H - Host, I - IGMP, r - Repeater, P - Phone
Device ID    Local Intrfce   Holdtme    Capability   Platform    Port ID
NewProducts  Fas 0/0          151            S       2950        Fas 0/24
HQ           Ser 0/2/1        151            R       C1841       Ser 0/0/1

0 comentarios:

 

©2009 Lo Agarro | Template Blue by TNB